揉捏奶头高潮呻吟视频试看-揉着我的奶从后面进去视频-肉大榛一进一出免费视频-肉色超薄丝袜脚交一区二区视频-肉色丝袜脚交一区二区-肉色丝袜脚专区一区二区

Search

Current Location:Home > News > Industry news

News
Daily Maintenance and Maintenance of Printing Machinery

Category:Industry news   Addtime:2019-03-23 10:34:00   Clicks:1491 次

In order to ensure the normal operation of the printing press, daily maintenance and maintenance is very important. Daily maintenance of printing press is an important task in equipment management of Fenghua Bolian Printing Machinery Co., Ltd. The static maintenance of printing press refers to the maintenance of the machine in a static state.

Establish rules and regulations for the maintenance of printing machines. Maintenance of printing press should be based on machine instructions. Such as regular oil change, filter cleaning, regular testing of machine accuracy, etc.

_2. Strengthen the maintenance of important parts of the machine. Gears, cams, sprockets, drums and bearings are the most important parts of the printing press. Their maintenance should be different from other parts, because the change of their accuracy will affect the final printing quality. Spring is the most widely used component of force balance mechanism in machine. Their working quality directly determines the accuracy of the coordination of moving parts. Spring must be sensitive to elasticity, while anelastic and irreversible plastic deformation are extremely disadvantageous to the work of spring. If the above problems are found, the spring should be replaced immediately.

_3. To carry out technological reform and strengthen the maintenance of printing machines. Machine maintenance requires that the convenience of machine maintenance be fully taken into account in the design of the machine. However, due to the complexity of the printing press, it is obviously impossible to take every factor into account, and the environment changes, the content of machine maintenance will also change. Therefore, it is necessary to improve the structure which is not conducive to the maintenance of the machine without affecting the normal work. The dynamic maintenance of the printing press refers to the maintenance of the machine under the dynamic state of the printing press. Machine static maintenance is the premise of machine dynamic maintenance, while the dynamic operation of the machine can in turn detect the level of machine static maintenance. Dynamic maintenance of machines is very important.

_1. Preparatory state detection of printing machine. The ready state of the machine can be checked by touching or turning. For example, tools and other items are stuck in the machine; whether the printing plate is installed properly, if not properly, it may cause damage to the printing plate or bring great difficulties in finding rules; whether the rubber cloth is installed properly, if not properly, it may cause printing failure, and in serious cases, it may cause damage to the rubber cloth or machine.

_2. Lubrication state of printing machine. First of all, we can observe whether the oil pipeline of the machine is smooth through the oil mark. If there is no oil in the oil mark or the oil mark is not clear, we should stop in an emergency and carefully check whether there is oil leakage in the oil pipeline. Although the oil spill in the machine is easy to observe, it is difficult to find the cause. For machines such as sliding bearings, low speed is not conducive to their lubrication, especially the point or low speed operation has a greater impact on their lubrication. Therefore, before doing this kind of operation, it is better to lubricate the idling machine first, which is also a primary task to be done before working every day. Some pumps of machines are driven by the main engine, so when the reverse point occurs, the oil pipeline can not refuel, but will suck the oil back into the tank. This is very dangerous, so the reverse point should be avoided. Lubrication of some important parts can also be detected by the metal temperature nearby. If the temperature is too high, it indicates that there is a problem with lubrication.

_3. Impact during the operation of printing machine. The smaller the impact, the better the printing, and the longer the service life of the machine. Reducing the printing pressure is an important condition to ensure the smooth operation of the machine. On the premise of ensuring the quality of printing, the smaller the printing pressure, the better. Reducing machine speed is another important condition to reduce machine inertia. The lower the machine speed is, the smaller the inertia is. Therefore, the machine can not always run at high speed.
主站蜘蛛池模板: 哪里可以免费看毛片 | 国产99久久久久久免费看 | 亚洲av日韩aⅴ无码色老头 | 久久久久毛片免费观看 | 亚洲精品av无码重口另类 | 欧美成人片一区二区三区 | 国产99久久久久久免费看 | 粗大黑人巨精大战欧美成人 | 国产丝袜视频一区二区三区 | 日韩亚洲制服丝袜中文字幕 | 成人a毛片 | 亚洲成人www | 欧美性xxxx极品少妇 | 天天操天天干天天透 | 亚洲精品久久久久久成人 | 日本一区二区三区免费看 | 日本老熟妇毛茸茸 | 亚洲人一区 | 欧美激性欧美激情在线 | 国产性大片黄在线观看在线放 | 九九九精品 | 国产69精品久久久久999小说 | 国产老湿机福利视频在线观看 | 精品亚洲一区二区三区四区五区 | 九色论坛 | 亚洲欧美日韩精品久久久 | 欧美内射深插日本少妇 | 四虎影视永久地址www成人 | 免费国产视频在线观看 | 久久人人爽人人爽人人片av东京热 | 久久亚洲精品久久国产一区二区 | 妺妺窝人体色www在线下载 | 男女猛烈无遮挡免费视频 | 精品日韩欧美一区二区三区在线播放 | 久久爱伊人 | 欧美精品黄页免费高清在线 | 亚洲毛片不卡av在线播放一区 | 欧美精品一区二区三区免费播放 | 欧美亚洲国产第一页草草 | 亚洲精品鲁一鲁一区二区三区 | 日本久久高清视频 |